{"product_id":"pkcell-lipo-battery-rakwireless-wisblock","title":"PKCell LiPo Battery for RAKwireless WisBlock, PH Connector (2000 mAh \/ 2500 mAh)","description":"\u003cp\u003e\u003cstrong\u003eThe right battery for your RAKwireless WisBlock build.\u003c\/strong\u003e These PKCell Li-Polymer batteries come pre-terminated with a PH connector that plugs directly into the battery port on WisBlock base boards. No soldering, no crimping, no adapters. Choose 2000 mAh for compact builds or 2500 mAh for maximum runtime.\u003c\/p\u003e\n\u003cp\u003eWhether you are building a custom Meshtastic node on a RAK4631, a solar-powered sensor with WisBlock modules, or a MeshCore repeater in your own enclosure, this is the power source that completes the build.\u003c\/p\u003e\n\u003ch3\u003eWhich Capacity Do I Need?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003e2000 mAh (LP803860)\u003c\/th\u003e\n\u003cth\u003e2500 mAh (LP785060)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8.0 x 38 x 60 mm\u003c\/td\u003e\n\u003ctd\u003e7.8 x 50 x 60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e~40 g\u003c\/td\u003e\n\u003ctd\u003e~48 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRuntime on nRF52840 WisBlock node\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 to 3 days typical\u003c\/td\u003e\n\u003ctd\u003e3 to 4 days typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBest for\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCompact enclosures, portable builds\u003c\/td\u003e\n\u003ctd\u003eSolar nodes, maximum runtime, wider enclosures\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eRuntime estimates assume a typical Meshtastic client configuration on an nRF52840-based WisBlock. Actual runtime depends on transmit frequency, GPS usage, and settings.\u003c\/p\u003e\n\u003ch3\u003eCompatible With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRAKwireless WisBlock base boards with PH battery connector (RAK19007, RAK19003, RAK19001)\u003c\/li\u003e\n\u003cli\u003eWisBlock Meshtastic starter kits and custom RAK4631 builds\u003c\/li\u003e\n\u003cli\u003eSolar-powered WisBlock nodes: both variants work with the WisBlock solar charging circuit\u003c\/li\u003e\n\u003cli\u003eAny device with a matching PH battery connector and 3.7V LiPo charging circuit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCheck Polarity Before Connecting\u003c\/h3\u003e\n\u003cp\u003eImportant: there is no universal standard for the pin order on PH battery connectors. Different manufacturers wire positive and negative in different positions. Before connecting any battery to your board, verify that the red wire (positive) aligns with the positive marking on your board's battery port. Connecting a battery with reversed polarity can permanently damage your board. These PKCell batteries follow the polarity convention used by RAKwireless WisBlock base boards, but a five second visual check protects a fifty euro board.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-terminated PH connector:\u003c\/strong\u003e plugs straight into WisBlock base boards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in protection circuit:\u003c\/strong\u003e guards against overcharging, over-discharging, overcurrent, and short circuits\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.7V nominal (4.2V charged):\u003c\/strong\u003e matches the WisBlock charging circuit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuality brand cells:\u003c\/strong\u003e PKCell is an established battery manufacturer, not an unlabelled clone with inflated capacity claims\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact flat form factor:\u003c\/strong\u003e fits typical 3D-printed and off-the-shelf project enclosures\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBuilding for RAK or Heltec?\u003c\/h3\u003e\n\u003cp\u003eThese batteries are intended for the RAKwireless WisBlock line. Building on Heltec boards instead? Those use a different connector standard. Use our \u003ca href=\"\/products\/heltec-3000mah-li-polymer-battery\"\u003eHeltec 3000 mAh battery\u003c\/a\u003e for the WiFi LoRa 32 V3, V4, and Wireless Tracker V2.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e PKCell\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemistry:\u003c\/strong\u003e Li-Polymer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal voltage:\u003c\/strong\u003e 3.7V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharged voltage:\u003c\/strong\u003e 4.2V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 2000 mAh (LP803860) or 2500 mAh (LP785060)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e PH type, pre-terminated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e Overcharge, over-discharge, overcurrent, short circuit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 8.0 x 38 x 60 mm (2000 mAh) \/ 7.8 x 50 x 60 mm (2500 mAh)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e CE, RoHS compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × PKCell LiPo battery in your selected capacity, with pre-terminated PH connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety Notice\u003c\/h3\u003e\n\u003cp\u003eLithium polymer batteries require correct handling. Charge only via the device's onboard charging circuit or a compatible LiPo charger. Do not puncture, short circuit, expose to fire, or leave in extreme temperatures. Store at approximately 50 percent charge between +10°C and +25°C when not in use. Dispose of used batteries at your local battery recycling point, in accordance with EU battery regulations.\u003c\/p\u003e\n\u003ch3\u003ePair It With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWisBlock Meshtastic Starter Kit: add this battery for portable or solar-powered operation\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/u-fl-ipex-to-n-female-pigtail-cable\"\u003eU.FL to N-Female pigtail\u003c\/a\u003e (€9,99): route the antenna connection out of your enclosure\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flexible-lora-antenna-868mhz\"\u003eFlexible LoRa Whip Antenna\u003c\/a\u003e (€17,95): complete your custom build with a tuned antenna\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PKcell","offers":[{"title":"2000 MAH","offer_id":57805571653963,"sku":null,"price":12.95,"currency_code":"EUR","in_stock":true},{"title":"2500 MAH","offer_id":57805571686731,"sku":null,"price":14.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0581\/8404\/0612\/files\/pkcell-lp785060-lipo-2500-mah-ph-stecker.jpg?v=1783604624","url":"https:\/\/hexaspot.com\/products\/pkcell-lipo-battery-rakwireless-wisblock","provider":"Hexaspot","version":"1.0","type":"link"}