WisBlock Unify Enclosure Solar IP65 100x75x38mm

The Unify Enclosures are modular IP65 rated outdoor enclosures that include tailored features to support WisBlock Base Boards and WisBlock Modules, but are highly adaptable to any application with spacious internals and thoughtfully designed universal mounting options.

The variant has an 80x45mm solar panel integrated in the lid and a matching cable for the Solar Panel Connector of the WisBlock Base Boards. Depending on the power consumption of your application, it can recharge a battery and make the product independent IP65-rated of an external power source.

Deployment of your IoT solution is easy thanks to a range of swappable mounting accessories that enable you to install your IoT solution in any setting. These accessories are hosted on the rear surface of the enclosure using the integrated mounting locations and are secured with M3 fasteners into robust and reusable brass threaded inserts.

The 100x75x38mm enclosure has enough internal space to support the following WisBlock Base Boards - RAK19003 and RAK19007.

There is also space for a flat profile LiPo battery to be hosted under an internal mounting plate. The space available below a mounting plate in standard configuration is approximately 55x34x6mm excluding narrow sections where there are enclosure features.

Enclosure Specifications:

• Material: ABS UL94V-0
• External Size: 100x75x38mm (including lid)
• Internal Space: Approx. 86x61x29mm (Usable space varies due to internal features)
• General Wall Thickness: 4.5mm
• Waterproofing: Silicone waterproof seal (square profile to prevent twisting upon install)
• Threading: Brass threaded inserts throughout (blind type)

Solar Panel Specifications:

• Open circuit voltage: 6.1V (±10%)
• Short circuit current: 95mA (±5%)
• Voltage at nominal power: 5V (±10%)
• Current at nominal power: 90mA (±5%)
• Cell efficiency: 18%
• Size: 80x45x1.7mm (±0.2mm)
• Temperature range: -20 to 65°C
• Humidity range: 45-85%